inorganic filler meaning in English
无机填充剂
无机填料
无机物填料
Examples
- In the field of high polymer material , kaolinite is the inorganic filler with more excellent performance than montmorillonite
在高分子材料领域，高岭土是性能较蒙脱土更加优异的无机填料。 - The superfine quartz powder is a sort of neutral inorganic fillers which is widely applied in plastic , rubber , rosin , dope , electron and other high and new - technology industries , the purity and granularity is required strictly in high and new - technology industries
超细石英粉是一种优质的中性无机填料,广泛应用于塑料、橡胶、树脂、涂料、电子及高科技产品等行业,其中高科技行业对超细石英粉的纯度和粒度组成都有相当严格的要求。 - Load and sliding speed on the wear mass lose were evaluated . at the same time , in order to estimate the role of different surface treatments on nano - inorganic filler and ptfe composites , ptfe composites filled with surface untreated nano - alios were prepared as antithesis at the same condition
同时，为了评价表面处理方法在无机纳米粒子塑料复合材料中所起的作用，制备了一份具有相同含量但未经表面处理纳米al _ 2o _ 3填充ptfe ，在相同工况下进行对比试验研究。 - Sintering or friction all brought about chemical change in the surface of solid lubricant and the change of valen ce state of mo , s , fe and so on ; the micro - hardness of pure ptfe was minimum and the surface - hardness of solid lubricant was increased with the increase of additional packing filler in formula ; the compressive strength of pure ptfe was minimum and its compressive strength could be increased notably by adding organic and inorganic filler . but not more additional amount , more notable increase of compre
、 feso4 、 cus等物质;烧结及摩擦均使固体润滑剂表面发生化学变化，使mo 、 s 、 fe等元素的价态发生变化;纯ptfe的显微硬度最低，固体润滑剂的表面硬度基本是随着填料加入量的增加而增加的;纯ptfe的抗压强度最低，在ptfe树脂中加入无机填料均可明显提高其抗压强度，但并不是加入量越多，抗压强度提高越明显。 - The method blending with rigid inorganic filler can improve tensile strength , while lowering impact strength of blends . so , the critic prohlem is how to increase impact strength and tensile strength simultaneously . recently hybrids of pp / clay but melting interca1ation method have been studied , and the results show that higher impact strength is obtained , while tensiie strength lost less
改善pp韧性的常用方法是与橡胶或弹性体共混复合，但在提高材料韧性的同时，拉伸强度损失严重；若用无机填料来改性pp ，材料的拉伸强度得到提高，但韧性下降较大，故提高即的韧性和拉伸强度似乎成了一对矛盾。